600H-600NH Series Toggle Switch

Industrial toggle switches with high amperage and metal or insulated lever. The 600 series are manufactured from a single piece of metal, increasing the mechanical strength.

MAIN FEATURES

  • Construction: Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength.
  • Rating: These switches are suitable for motor loads and power applications up to 15 A 250 VAC or 10 A 400 VAC.
  • Metal or insulated lever.
  • UL, CSA and NF-VDE (EN 61058-1) approved.
  • Ideal replacement for 1500, 1600, 1700 Series Toggle

 

 

Description

APEM 600H-600NH series Toggle Switch are manufactured from a single piece of metal, increasing the mechanical strength. Industrial toggle switches with high amperage and metal or insulated lever.

MAIN FEATURES of the 600H-600NH Series Toggle Switch:

  • Construction: Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength.
  • Rating: These switches are suitable for motor loads and power applications up to 15 A 250 VAC or 10 A 400 VAC.
  • Metal or insulated lever.
  • UL, CSA and NF-VDE (EN 61058-1) approved.
  • Ideal replacement for 1500, 1600 and 1700 series Toggle.

Control Devices is the official APEM distributor for Australia and New Zealand. APEM offers a broad selection of quality products with proven effectiveness in harsh environments. From Push buttons, Rockers, Toggles, LED indicators, Emergency Stops to Joysticks and keypads.

APEM develops and manufactures professional switch products for diversified markets including instrumentation, medical, communications, industrial automation, defence and transport. With a vertically integrated production, and controls all stages of product development and production: from tooling, moulding, screw machining to assembly and final inspection.

APEM’s dedication and experienced teams can respond to the most complex requirements. This technical expertise ensures the continuous growth of our product ranges, allowing strong partnerships with our customers and providing the necessary flexibility to create an infinite number of products.

APEM offers a range of more than 50,000 customisable part numbers: colour, marking, finish, shape and dimensions… unlimited combinations are possible. This variety of components allows them to create the unique combination to match your design. Custom colours, specific materials, special backlighting or varied shapes are available upon request. Particular attention is paid to the cosmetic appearances of our products to best match your requirements, from specific markings to brightness illumination for outdoor applications.

By controlling all phases of manufacturing and quality control, APEM products offer the ability to withstand the adverse elements associated with harsh environments, without affecting their life expectancy.

See all APEM Products

Follow us on Facebook

• Max. current/voltage ratings: see full data sheet
• Peak current: 30 A max. during 1/2 sine, 250 VAC
• Initial contact resistance: 10 mΩ max.
• Insulation resistance: 1,000 MΩ min. at 500 VDC
• Dielectric strength:
2,000 Vrms 50 Hz min. between terminals
2,500 Vrms 50 Hz min. between terminals and frame
• Electrical life: 10,000 cycles at full load

• Torque: 1.50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness: 4.5 mm (.177) max. between 2 nuts

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature : -20 °C to +55 °C (-20 °F to 131 °F)

MATERIALS
• Case: polyester UL94-V0
• Actuator :
- 600H: brass, nickel plated
- 600NH: black polyamide
• Bushing: brass, nickel plated
• Contacts: silver/nickel alloy

Content missing