P505 Rotary Position Sensor

P505 with its 19mm diameter body is a miniature, high accuracy rotary position sensor designed for industrial, automotive and scientific feedback applications. Like all Positek® sensors the P505 is supplied with the output calibrated to the angle specified by the customer, between 15 and 160 degrees.The electronics are all fully integrated, no external signal conditioning is required. The sensor provides a linear output proportional with angle of rotation. There is a small machined registration mark to identify the calibrated mid point.

The P505 is well suited to OEMs where good sensor performance and compact housing is important. It also requires a smaller footprint compared to the P500 rotary position sensor.

Overall performance, repeatability and stability are outstanding over a wide temperature range. The P505 has a anodised aluminium flange, stainless steel body and shaft for a long service life and excellent environmental resistance. The sensor is easy to install with flange or servo mounting options, it also offers a range of electrical options. Sealing is IP67 and full EMC protection built in.

View all Rotary Sensors

 

Description

The Positek P505 slim-line rotary position sensor with its 19mm diameter body is a miniature, high accuracy rotary position sensor designed for industrial, automotive and scientific feedback applications. Like all Positek® sensors, the P505 is supplied with the output calibrated to the angle specified by the customer, between 15 and 160 degrees.The electronics are all fully integrated, no external signal conditioning is required. The sensor provides a linear output proportional with angle of rotation. There is a small machined registration mark to identify the calibrated mid point.

The P505 slim-line rotary position sensor is well suited to OEMs where good sensor performance and compact housing is important. It also requires a smaller footprint compared to the P500 rotary position sensor.

Overall performance, repeatability and stability are outstanding over a wide temperature range. The P505 has a anodised aluminium flange, stainless steel body and shaft for a long service life and excellent environmental resistance. The sensor is easy to install with flange or servo mounting options, it also offers a range of electrical options. Sealing is IP67 and full EMC protection built in.

As a leading designer and manufacturer of linear, rotary, tilt and intrinsically safe position sensors, Positek® has the expertise to supply a sensor to suit a wide variety of applications.

Follow us on Facebook

Positek offers a range of options for its standard sensors. Each sensor is manufactured to suit each customer's preferences. If your requirement is outside the options given below, Positek can modify/ redesign a sensor to suit your specific requirement. Standard options are available as below:

 

Measurement Range

Factory set to any length from ±7.5° to ±80° in increments of 1°. For example, if your application requires 90° measurement, then Positek will manufacture the sensor specifically for this angular range. The sensor will measure 90° however will still rotate through 360°.

 

Electronic Options

Output Signal Supply Input Option Code
Standard    
0.5V to 4.5V DC ratiometric +5V DC nom. ±0.5V A
Buffered
0.5V-4.5V DC +24V DC nom. +9-28V  G
0.5-9.5V DC +24V DC nom. +13-28V C

 

Connector/Cable Options

Option Option Code
Connector, Axial, IP67, M8 4 pin J
Cable, Axial Gland IP67 L
Cable length - The standard length of cable supplied with a Positek position sensor is 50cm although you can specify any length you require./td>

Specified in cm after the L e.g. L200 for 200cm cable from axial cable gland

 

Mounting Options

Option Option Code
Flanged housing Blank
Servo Mount P

 

<+/-0.1% FSO Linearity error (10mm minimum stroke length) Option Code
Z650

Dimensions

Body Diameter 19mm
Body Length (to seal face) 45.4mm standard, 50.4mm buffered/td>
Shaft 8mm, OD 4mm
Measurement Range Any angle from ±7.5° to ±80°
Independent Linearity <±0.25% up to 100° at 20°C
<±0.1% available on request
Temperature Coefficient <±0.01%/°C Gain & <±0.01%FS/°C Offset
Resolution Infinite
Noise

<0.02% FSO

Shaft Torque <15mNm static
Frequency Response

>10KHz (-3dB)

 

Output Signal and Output Load

Output Signal Output Load
0.5 to 4.5 V DC ratiometric 5k Ohms min
0.5 to 4.5 V DC 5k Ohms min
0.5 to 9.5 V DC 5k Ohms min
Supply Current 10 mA Typical 20 mA max

 

Temperature Limits

Operating -40 to +125°C (5V input only)
-20 to +85°C
Storage -40 to +125°C

 

Other

EMC Susceptibility EN 61000-6-2
EMC Radiated EN 61000-6-3
Vibration IEC 68-2-6: 10g
Shock IEC 68-2-29: 40g
MTBF 350,000 hrs 40°C Gf
Sealing IP67
Electrical Connections Screened cable or M8 4 pin connector

Content missing