SA59661 Body Clamp Mounting Kit

Body clamp mounting kits for Penny & Giles SLS320 Linear Displacement Sensor. Kit comes with two clamps.

Mounting recommendation for all units between 1150 to 1600 mm stroke length, Penny & Giles recommends the use of body clamp or flange mounting kits to support the sensor when horizontally mounted. Alternatively, use the protective sleeve kit with the self aligning bearing mountings to provide increased rigidity.

View all Sensor Accessories

 

Description

The Penny & Giles SA59661 body clamp mounting kit is designed for Penny & Giles SLS320 Linear Sensor. The SA59661 kit comes with two clamps for stability.

The mounting kit is recommended for all units between 1150 to 1600mm stroke length, Penny & Giles recommends the use of body clamp or flange mounting kits to support the sensor when horizontally mounted. Alternatively, use the protective sleeve kit with the self aligning bearing mountings to provide increased rigidity.

The SLS320 sensor is used for heavy duty cycle dynamic applications. A number of specialist applications have demanded an enhanced operating life beyond the standard SLS320 sealed linear sensor. To meet this requirement, we have a special version of this product, which provides optimum lubrication for the track and sliding mechanism for increased operating life. Typically the sensors are mounted parallel using the SA59661 body clamp mounting kit to actuators fitted to the hydraulic motion bases. These bases operate leisure ride cabins at amusement parks around the world. Typically the motion bases run a three minute cycle time for up to 12 hours per day. This sensor is ideally suited for similar applications subject to heavy duty dynamic movements.

View all Linear Sensors

Follow us on Facebook

Content missing