• Contact resistance: 10 M Ω
• Recommended load:
Silver- 0.5 - 50 mA 24 VDC
Gold - 0.5μ - 50 mA 24 VDC
• Contact bounce: <2 mS - typically 0.5 mS
Multimec 5E
NOTE: This item is not available for distribution in NZ, please contact us for other products that are available.
Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5E is only available in high temperature material in order to stand today’s advanced soldering processes.
Caps available for Multimec 5E switches are: 1SS, 1PS and 1YS.
The switches have a dimension of 10 x 10 mm and a height of 6.4 mm. The switch has a momentary NO or NC/NO switch function. It has an IP67 sealing. It van operate 10,000,000 cycles
The switches has a surface mounting (SMD), Through hole (TH) or through-hole RAS mounting.
• Standard actuation force (switch):
NO - 2.0 N, 3.5 N, 6.5 N
Quiet - 2.0 N
NC/NO - 3.5 N
• Max. Actuation force without cap:
NO - 115 N for 60 sec (according to MIL-PRF-22885H)
NC/NO - 100 N for 10 sec
• Key travel (switch): 1 mm
• Lifetime:
NO - >10,000,000 cycles
NC/NO - >1,000,000 cycles
• Through-hole (TH) or surface mount (SMD) or right angel through-hole
• 50 mA / 24 VDC
• Single pole/momentary
• 10,000,000 operations lifetime (NO function)
• Temperature range: -40/+160 °C
• IP67 sealing
• Actuation force: 2.0 N, 3.5 N, 6.5 N
NO or NC/NO
ENVIRONMENTAL SPECIFICATIONS
• Working temperature: -40/+160 °C
• Storage temperature: -40/+160 °C
• Soldering (TH): IEC 68-2-20 8
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMETAL ENDURANCE IEC 68-2-3
• Temperature: +40 °C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85 °C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP67
MATERIALS
• Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver - Stainless steel: + 3μAg
Gold - Stainless steel + 1μAu
• Fixed contacts:
Silver - SnCu + 2μNI + 3μAg
Gold - SnCu + 2μNI + 1μAu
• Terminals: SnCu + 2μNI + 3μSn100
Content missing
Related Products
-
The 3600NF toggle switches are in 1 and 2 pole configurations. Sealed industrial toggle switches for outdoor applications. Featuring solder lug, quick-connect or screw term...
3600NF Series Toggle Switch
The 3600NF toggle switches are in 1 and 2 pole configurations. Sealed industrial toggle switches for outdoor applications. Featuring solder…
-
APEM MJTP Series 12mm square tact switches, through hole Featuring SPST momentary action with excellent tactile feedback (snap dome). Long operating life for high reliabil...
MJTP Series 12mm Through Hole Tact Switches
APEM MJTP Series 12mm square tact switches, through hole Featuring SPST momentary action with excellent tactile feedback (snap dome). Long operating…
-
APEM 21000N Series low profile toggle switches available in single pole and double pole. Featuring threaded and smooth bushing. Wave solderable. Silver or gold-plated conta...
21000N Series Toggle Switch
APEM 21000N Series low profile toggle switches available in single pole and double pole. Featuring threaded and smooth bushing. Wave…
-
APEM 12000 Series toggle switches specially manufactured for defence, telecommunications and other industrial applications. 1, 2, 3 and 4 pole configurations, silver, gold-pla...
12000 Series Toggle Switch
APEM 12000 Series toggle switches specially manufactured for defence, telecommunications and other industrial applications. 1, 2, 3 and 4 pole…








