• Standard actuation force (switch):
NO - 2.0 N, 3.5 N, 6.5 N
Quiet - 2.0 N
NC/NO - 3.5 N
• Max. Actuation force without cap:
NO - 115 N for 60 sec (according to MIL-PRF-22885H)
NC/NO - 100 N for 10 sec
• Key travel (switch): 1 mm
• Lifetime:
NO - >10,000,000 cycles
NC/NO - >1,000,000 cycles
Multimec 5G
NOTE: This item is not available for distribution in NZ, please contact us for other products that are available.
Multimec 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today’s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in order to provide excellent illumination. Night vision (NVIS) LEDs are also available.
Caps that fit Multimec 5G switches: 1A, 1B, 1C, 1DS, 1ES, 1FS, 1GAS, 1GCS, 1H, 1IS, 1JS, 1KS, 1KBS, 1KCS, 1LS, 1M, 1NS, 1PS, 1QS, 1RS, 1SS, 1TS, 1US, 1VS, 1WAS, 1WDS, 1WPS, 1XS, 1ZA, 1ZB, 1ZCS, 1Z, 1ZW and Aquamec.
The switch has a dimension of 10 x 10 mm and a height of 6.4 mm. The switch has momentary NO or NC/NO switch functions. It has an IP67 sealing.
It can operate up to 10,000,000 cycles. Designed to have Surface mount (SMD), Through hole (TH) or through-hole RAS mounting. The switch has the option to be illuminated.
• Contact resistance: 10 M Ω
• Recommended load:
Silver- 0.5μ - 50 mA 24 VDC
Gold - 0.5μ - 50 mA 24 VDC
• Contact bounce: <2 mS - typically 0.5 mS
• Through-hole (TH) or surface mount (SMD) or non-illuminated right angle though-hole
• 50 mA / 24 VDC
• Single pole/momentary
• 10,000,000 operations lifetime (NO function)
• Temperature range:
Switch: -40/+160 °C
LED: -40/+85°C
• IP67 sealing
• Actuation force: 2.0 N, 3.5 N, 6.5 N
• NO or NC/NO
ENVIRONMENTAL SPECIFICATIONS
• Working temperature: -40/+160 °C
• Storage temperature: -40/+160 °C
• 5G with LED (working & storage temp): Min -30 °C Max +85 °C
• Soldering (TH): IEC 68-2-20 8
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMETAL ENDURANCE IEC 68-2-3
• Temperature: +40 °C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85 °C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP67
MATERIALS
• Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver - Stainless steel: + 3μAg
Gold - Stainless steel + 1μAu
• Fixed contacts:
Silver - SnCu + 2μNi + 3μAg
Gold - SnCu + 2μNi + 1μAu
Terminals: SnCu + 2μNi + 3μSn100
Content missing
Manufacturer
