Ditel RS2 Series RS232C Output Options

RS2 Series Output Option RS232C

The RS2 output option allows the communication between a KOSMOS instrument and a master device via RS232C interface.

The option is supplied with the following accessories:

  • RS2 card.
  • A 2m cable RJ11 with telephone plug.

Software configuration permits selection of the instrument address, transmission rate (1200 to 19200 baud), communications protocol (standard, ISO 1745 or MODBUS RTU).

 

Get a Quote

Content missing

Related Products

  • Ditel 2RE 2 relay meter options

    An option of 2 or 4 setpoints, programmable within the full display range, can be incorporated to the unit thus providing alarm and control capabilities by means of individual...

    Control Output Option 2 Relays – 2RE Series

    An option of 2 or 4 setpoints, programmable within the full display range, can be incorporated to the unit thus…

    View Details
  • Ditel NMV Series 0-10V Analog output

    Two ranges of analogue output (0-10V and 4-20mA) can be incorporated to the new MICRA family by means of an additional card, either the NMV card for voltage output or the NMA ...

    NMV Series Analogue Output Option 0-10V

    Two ranges of analogue output (0-10V and 4-20mA) can be incorporated to the new MICRA family by means of an…

    View Details
  • Ditel PNP 4OPP Series Control Output Options

    An option of 2 or 4 setpoints, programmable within the full display range, can be incorporated to the unit thus providing alarm and control capabilities by means of individual...

    PNP Control Output Option 4 Transistors – 4OPP Series

    An option of 2 or 4 setpoints, programmable within the full display range, can be incorporated to the unit thus…

    View Details
  • Ditel Pica 100-F and Pica 100-F6 Digital Panel Meter

    The Pica 100 comes in a 48 x 24mm or 1/32 DIN frame, it is a fully programmable panel meter by using  front keys under the display or by input signals in teach (tEAc) mode. ...

    Pica 100-F Digital Panel Meter

    The Pica 100 comes in a 48 x 24mm or 1/32 DIN frame, it is a fully programmable panel meter…

    View Details