Communications & Networking

view style:
  • NF20 Power Factor Controller

    The Lumel NF20 power factor controller is designed for reactive power compensation. It controls external reactive power element (capacitor) to…

  • P10 DC Transducer

    The Lumel P10 DC Transducer ensures galvanic isolation between input, output and the supply circuit. The transducer meets all the…

  • P10Z AC Transducer

    The Lumel P10Z AC Transducer transforms the RMS value of AC current and voltage into standard DC signal input, output…

  • P15 DC Transducer/Separator

    The Lumel P15 DC Transducer/Separator (Splitter) ensures galvanic isolation between input. Two outputs and the supply circuit. The transducer meets…

  • P17 Transducer

    The Lumel P17 Transducer of temperature and standard signals is designed to convert the signal from temperature, resistance or voltage…

  • P17G Passive separator

    The Lumel P17 Passive separator in a housing of 6.2 mm width, serves for the electric isolation and filtration of…

  • P20 Transducer

    The Lumel P20 Programmable transducer is designed to convert the temperature, resistance, voltage from shunt and standard signals into a…

  • P20G Programmable Separator/Transducer

    The Lumel P20G Programmable Separator/ Transducer assures full galvanic isolation of the input, output and auxiliary supply and matching of…

  • P20H Transducer

    The Lumel P20H Transducer of d.c. voltage or current are applied for the continuous conversion of d.c. voltage and d.c.…

  • P20Z Transducer

    The Lumel P20Z Transducer of a.c. current or voltage.The P20Z Measuring transducer is designed with a continuous conversion of the…

  • P21Z Programmable transducer

    The Lumel P21Z Programmable Transducer of a.c. current, voltage or frequency is designed with a continuous conversion of a.c. current…

  • P30H Transducer

    The Lumel P30H Transducer of D.C. Circuit parameters with Ethernet. is a transducer which is designed for photovoltaic, battery, telecommunications…

  • P30O Transducer

    The Lumel P30O Transducer of pulses, frequency, turns, operation time with Ethernet. This is a programmable transducer that is designed…

  • P30P Transducer

    The Lumel P30P is a transducer which was designed to measure 1-phase power network parameters. It can measure and record…

  • P41 Transducer

    The P41 1-phase programmable transducer of power network parameters is designed for conversion into analog or digital signals 1-phase network…

  • P43 Transducer

    The Lumel P43 Transducer of power network parameters is designed for the conversion of 3-phase, 3 or 4 wire power…

  • PD10 Converter of USB/RS485 Interface

    The Lumel PD10 converter is designed for the conversion of USB interface to RS485 interface. The PD10 Converter uses two…

  • PD8 Converter of RS485/Ethernet interface

    The Lumel PD8 Converter of RS485/ETHERNET Interface enables the access to devices with RS485 interfaces for master devices and SCADA…

  • RP3 Power Controller

    The Lumel RP3 Power Controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an…

  • RP7 Power Controller

    The Lumel RP7 Power Controller allows to control the delivered power from an a.c. voltage source to a resistance or…

  • RPL1 Power Controller

    The Lumel RPL1 Power Controller controls resistant and resistive load (transformer connected too resistive load or to rectifier circuit). 

  • S4AI Analog input module

    The Lumel S4AI Module has 4 analog inputs dedicated to convert standard signals (current, voltage, temperature, resistance) into digital RS485…

  • S4AO Analog output module

    The Lumel S4AO modules comes with 4 analog outputs dedicated to convert digital data sent by mens of the MODBUS…

  • SM2 Analog input module

    The Lumel SM2 Analog input module has 4-channels and is designed to convert standard signals, resistance or temperature signals into…

  • SM3 Logic or Pulse input Modules

    The Lumel SM3 Logic or Pulse input modules come with 2-channels and is designed to collect logic states or to…

  • SM4 Logic Output Module

    The Lumel SM4 Logic Output Modules is designed to control simple executing devices through the assigned logical states, received from…

  • T22CT AC Transducer

    The Lumel T22CT AC Transducer is a very reliable, efficient and robust transducer for measurement of AC current. It provides…

  • T23CT AC/DC Transducer

    The Lumel Hallotron T23CT transducer is designed for continuous conversion of DC and AC RMS into a standard DC 4-20mA…