CUSTOMER CARE call 0800 44 33 46
Lost password?
Excellence in Engineering
The Lumel P17 Transducer of temperature and standard signals is designed to convert the signal from temperature, resistance or voltage…
The Lumel P17 Passive separator in a housing of 6.2 mm width, serves for the electric isolation and filtration of…
The Lumel P20 Programmable transducer is designed to convert the temperature, resistance, voltage from shunt and standard signals into a…
The Lumel P20G Programmable Separator/ Transducer assures full galvanic isolation of the input, output and auxiliary supply and matching of…
The Lumel P20H Transducer of d.c. voltage or current are applied for the continuous conversion of d.c. voltage and d.c.…
The Lumel P20Z Transducer of a.c. current or voltage.The P20Z Measuring transducer is designed with a continuous conversion of the…
The Lumel P21Z Programmable Transducer of a.c. current, voltage or frequency is designed with a continuous conversion of a.c. current…
The Lumel P30H Transducer of D.C. Circuit parameters with Ethernet. is a transducer which is designed for photovoltaic, battery, telecommunications…
The Lumel P30O Transducer of pulses, frequency, turns, operation time with Ethernet. This is a programmable transducer that is designed…
The Lumel P30P is a transducer which was designed to measure 1-phase power network parameters. It can measure and record…
The P41 1-phase programmable transducer of power network parameters is designed for conversion into analog or digital signals 1-phase network…
The Lumel P43 Transducer of power network parameters is designed for the conversion of 3-phase, 3 or 4 wire power…
The Lumel PD10 converter is designed for the conversion of USB interface to RS485 interface. The PD10 Converter uses two…
The Lumel RP3 Power Controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an…
The Lumel RP7 Power Controller allows to control the delivered power from an a.c. voltage source to a resistance or…
The Lumel RPL1 Power Controller controls resistant and resistive load (transformer connected too resistive load or to rectifier circuit).
The Lumel S4AI Module has 4 analog inputs dedicated to convert standard signals (current, voltage, temperature, resistance) into digital RS485…
The Lumel S4AO modules comes with 4 analog outputs dedicated to convert digital data sent by mens of the MODBUS…
The Lumel SM2 Analog input module has 4-channels and is designed to convert standard signals, resistance or temperature signals into…
The Lumel SM3 Logic or Pulse input modules come with 2-channels and is designed to collect logic states or to…
The Lumel SM4 Logic Output Modules is designed to control simple executing devices through the assigned logical states, received from…
The Lumel T22CT AC Transducer is a very reliable, efficient and robust transducer for measurement of AC current. It provides…
The Lumel Hallotron T23CT transducer is designed for continuous conversion of DC and AC RMS into a standard DC 4-20mA…
Enter the destination URL
Or link to existing content
