Alpha Series Digital Panel Meter

The ALPHA series is an advanced digital panel meter for the measurement and control of process variables, temperature, pulse input and load cells. A full complement of standard functions include ±32000 count display and set-point programming.

The Alpha series is available with the following inputs;
Process – Voltage, Current, Potentiometer, Ohmmeter, Volume Calculation & Logarithm Functions
Load Cell – +/- mV/V with Fail Safe, Sensor Break Detection, Linearisation & Rate of Change
Pulse Input – Tachometer, Chronometer, Batch Counter & Totaliser
Temperature – Pt100 & Pt1000, Thermocouples J, K, T, N, R, S & E with Fail Safe & Sensor Wire Break Detection

 

Description

Ditel Alpha Series Digital Panel Meter

The ALPHA series is an advanced digital panel meter for the measurement and control of process variables, temperature, pulse input and load cells. A full complement of standard functions include ±32000 count display and set-point programming.

The Alpha series is available with the following inputs;
Process – Voltage, Current, Potentiometer, Ohmmeter, Volume Calculation & Logarithm Functions
Load Cell – +/- mV/V with Fail Safe, Sensor Break Detection, Linearisation & Rate of Change
Pulse Input – Tachometer, Chronometer, Batch Counter & Totaliser
Temperature – Pt100 & Pt1000, Thermocouples J, K, T, N, R, S & E with Fail Safe & Sensor Wire Break Detection

DITEL has the widest range of Digital Panel Meters for the monitoring and control of industrial processes. They also have a very complete range of Large Displays that offer a high number of possibilities in terms of visualisation and communication:
Several heights of digits allowing long viewing distances, most common communication protocols available, adaptability to many kind of environmental conditions, numeric and alphanumeric contents,..etc. All these with a view to help your company improving such important matters as productivity, Focus on goals and objectives, Results achievements, Security, etc…

Since its creation in 1984 DITEL has concentrated on the development and manufacture of digital instruments that integrate systematically the highest technology while increasing continuously their flexibility and adaptability to virtually all industrial and service applications. This resolutely innovative approach, reinforced by a solid international network, is positioning DITEL as one of the favourite partner for the industry around the world.

See all Ditel Products

Follow us on Facebook

DESCRIPTION
The ALPHA-T model, version firmware 2.00 is an instrument for temperature measurement in ºC or ºF.

Keyboard selection of the input type enables direct connection to several types of transducers such as Pt100 ( 3 or 4 wires), Pt1000 (2 wires) or thermocouples J, K, T, R, S, or E.

Display reading in Celsius or Fahrenheit scale, resolution of degrees, tenths of degree or hundredth of degree (only Pt100 4 wires) and programmable offset temperature from -99 to +99 counts of display, allows the meter be adapted to fit the desired application.

In addition, 19 logical remote functions, Sensor Break detection and a 10 levels filter provide stable reading in almost any process apllication.

DATASHEET

TECHNICAL MANUAL

DESCRIPTION
The model ALPHA-P 2.00 is a digital indicator for measurement and control of process variables with direct indication in engineering units. A full complement of standard functions include ±32000 count display, direct access to the set-points programming.

The programming software allows selection of:
• Sensor type, input level and sensor supply
• Two way scaling display
• Two type Filters with 10 levels each
• Round of display value
• 36 Programmable Logical functions
• Automatic Volume Calculation
• Fail Safe function on Setpoints
• 30 points linearization
• Integrator and Totalizer with batch
• Programming Parameters Lockout
• Back to Factory Configuration
• 3 Tare Mode
• Blincking Display on alarm
• r.o.C. (rate of change) function
• Arc-Sinus function

DATASHEET

TECHNICAL MANUAL

The ALPHA-D model is a High Performance pulse input digital panel meter with two configurable inputs for connection to a wide variety of sensors and pulse generators.

Capable of making the functions of:
• COUNTER WITH MEMORY
• Batch counter, UP counter, DOWN counter and bi-directional (UP/DOWN) counter.
• CHRONOMETER / TIMER WITH MEMORY
• FREQUENCYMETER / TACHOMETER

For measurement of frequency, RPM, speed, flow and time.

DATASHEET

TECHNICAL MANUAL

DESCRIPTION
The ALPHA-C model is an instrument designed to measure forces (weight, load, pressure, torque, etc). It admits connection to several bridge type transducers such as load-cells with low level signals up to ±300 mV and it provides an excitation voltage of 10 V or 5 V DC @ 120 mA that allows the connection up to 4 or 8 parallel load cells. A wide amount of functions that include the possibility of reading
up to ±32000 points, signal linearisation of up to 30 points, 36 programmable logical functions and direct access to the set-point values.

The programming menu allows the user to:
– Select input sensitivity
– Two display scaling methods
– Two filter types with 10 levels each
– Display value round.
– Programming parameters selective locking (code).
– Back to factory configuration

New from version C2.00
– 3 Tare mode
– Sensor break detection (any wire)
– Fail Safe independently programmable on each relays
– Function R.O.C. (Rate of Change)

DATASHEET

TECHNICAL MANUAL