AV Series 30mm Illuminated push button

APEM expands its range of security switches with a series of larger diameter push buttons. The AV 30 mm NC/NO push buttons are easy to operate due to their large actuation surface. Their wider illuminated ring makes them highly visible on the panel.

MAIN FEATURES

  • Bushing diameter 30 mm
  • Momentary NC/NO
  • Robustness: IK06
  • Panel sealing: IP67
  • Illuminated ring, 7 different colours
  • Mechanical life: 1 million cycles

 

Description

APEM AV 30mm NC/NO Illuminated push button is easy to operate due to their large actuation surface. Their wider illuminated ring makes them highly visible on the panel. APEM expands its range of security switches with a series of larger diameter push buttons. 

MAIN FEATURES of the AV 30mm Illuminated push button:

  • Bushing diameter 30 mm
  • Momentary NC/NO
  • Robustness: IK06
  • Panel sealing: IP67
  • Illuminated ring, 7 different colours
  • Mechanical life: 1 million cycles

Control Devices is the official APEM distributor for Australia and New Zealand. APEM offers a broad selection of quality products with proven effectiveness in harsh environments. From Push buttons, Rockers, Toggles, LED indicators, Emergency Stops to Joysticks and keypads.

APEM develops and manufactures professional switch products for diversified markets including instrumentation, medical, communications, industrial automation, defence and transport. With a vertically integrated production, and controls all stages of product development and production: from tooling, moulding, screw machining to assembly and final inspection.

APEM’s dedication and experienced teams can respond to the most complex requirements. This technical expertise ensures the continuous growth of our product ranges, allowing strong partnerships with our customers and providing the necessary flexibility to create an infinite number of products.

APEM offers a range of more than 50,000 customisable part numbers: colour, marking, finish, shape and dimensions… unlimited combinations are possible. This variety of components allows them to create the unique combination to match your design. Custom colours, specific materials, special backlighting or varied shapes are available upon request. Particular attention is paid to the cosmetic appearances of our products to best match your requirements, from specific markings to brightness illumination for outdoor applications.

By controlling all phases of manufacturing and quality control, APEM products offer the ability to withstand the adverse elements associated with harsh environments, without affecting their life expectancy.

See all APEM Products

Follow us on Facebook

Additional information

Illuminated

Yes

Maximum Current

1A – 30VDC

Switch Operation

Momentary (NC/NO)

• Max. current/voltage rating with resistive load : 1 A 30 VDC
• LED voltage : 12 VDC, 24 VDC or 48 VDC
(If not supplied by APEM, a resistor must be series-connected by the user)**
• Initial contact resistance : 100 m Ω max.
• Insulation resistance : 10 M Ω min. at 500 VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals 1,000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 250,000 cycles at full load
• Operating force : 5 N ± 2 N

• Travel : 2.5 mm ± 0.3 mm (.003)
• Torque : 10 Nm max.
• Robustness : IK06 according to EN 62262 (1 joule)
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Low level or mechanical life : 1,000,000 cycles
• Operating temperature : -30 °C to +85 °C
• Hand soldering : 350 °C, 5 seconds max.
• Packaging unit : flying lead/cable models : 1 piece - other models : 25 pieces

MATERIALS
• Case : polyamide, glass filled
• Contacts : silver
• Elastomeric membrane : silicone
• LED

Content missing