DIN KOS206P Temperature Converter In-Head

  • Configuration using USB port powered
  • Configurable in seconds
  • High stability
  • Over range LED indication
  • Programmable burnout

The KOS206P is a cost effective “smart” in head converter that accepts Pt100 temperature sensors and converts sensor output over a configured range to a standard industrial (4 to 20 mA) transmission signal.

PC configuration allows the user to select range, units and burnout directions without requiring calibration equipment. Configuration is performed quickly using our new KOSUSB port driven configurator by simply connecting two clips to the KOS206P loop terminal and following the software instructions.

Calibration set up may be saved as a file on the PC for later use. The KOS206P in head converter incorporates the latest digital technology to ensure accurate drift free performance. If required the desired range can be specified at the time of order, removing the need for user configuration. IF the range is not specified then the converter will be shipped with the default range of 0-100ºC.

 

Update Time 500 ms
Response Time 1 second
Start up time 4 Seconds (I out <4 mA during start up)
Warm up time 1 minute to full accuracy
Power Supply 10 to 30 Vdc
INPUT
Sensor Type/td>

Pt100 100 R @ 0ºC 2 or 3 wire
Sensor Range -200 to +850ºC - 18 to 390 Ω
Sensor Connection Screw Terminal
Minimum Span (*1) 25ºC
Linearisation EN 60751 (IEC 751) Standard / JISC 1604
Measurement Accuracy(*2) 0.1ºC ±0.05% of reading
Thermal Drift 25 ppm / ºC
Excitation Current <200μA
Lead Resistant effect 0.002ºC / Ohms
OUTPUT
Output Type 2 wire 4 to 20 mA current loop
Output range 4 to 20 mA
Output Connection Screw Terminal
Maximum Output 21.5 mA (in high burnout conditions)
Minimum output 3.8 mA (in low burnout conditions)
Accuracy mA output / 2000 or 5μA (Whichever is greater)
Loop Voltage Effect 0.2μA / ºC
Thermal Drift 1μA / ºC
Maximum Output load V supply - 10/20 K Ohms (Example 700 Ohms @24V

Content missing