IZ Series Metal Momentary Push Button

The IZ series is a rear mounted push button, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.

MAIN FEATURES

  • Rear mounting for easier installation
  • Momentary metal models
  • Fixed or variable panel thickness
  • Screw version available up to 4A
  • Sealed to IP67
  • Illuminated or non-illuminated
  • Flat actuator for optional marking

 

Description

APEM IZ series is a rear mounted Momentary push button, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.

MAIN FEATURES of the IZ Series Metal Momentary Push button:

  • Rear mounting for easier installation
  • Momentary metal models
  • Fixed or variable panel thickness
  • Screw version available up to 4A
  • Sealed to IP67
  • Illuminated or non-illuminated
  • Flat actuator for optional marking

Control Devices is the official APEM distributor for Australia and New Zealand. APEM offers a broad selection of quality products with proven effectiveness in harsh environments. From Push buttons, Rockers, Toggles, LED indicators, Emergency Stops to Joysticks and keypads.

APEM develops and manufactures professional switch products for diversified markets including instrumentation, medical, communications, industrial automation, defence and transport. With a vertically integrated production, and controls all stages of product development and production: from tooling, moulding, screw machining to assembly and final inspection.

APEM’s dedication and experienced teams can respond to the most complex requirements. This technical expertise ensures the continuous growth of our product ranges, allowing strong partnerships with our customers and providing the necessary flexibility to create an infinite number of products.

APEM offers a range of more than 50,000 customisable part numbers: colour, marking, finish, shape and dimensions… unlimited combinations are possible. This variety of components allows them to create the unique combination to match your design. Custom colours, specific materials, special backlighting or varied shapes are available upon request. Particular attention is paid to the cosmetic appearances of our products to best match your requirements, from specific markings to brightness illumination for outdoor applications.

By controlling all phases of manufacturing and quality control, APEM products offer the ability to withstand the adverse elements associated with harsh environments, without affecting their life expectancy.

See all APEM Products

Follow us on Facebook

Additional information

Switch Mounting

Panel Mounting

• Max. current/voltage rating with resistive load:
- Gold plated silver contacts (code 4): 200 mA 48 VDC
- Silver contacts (code 2) - screw terminals: 4 A 48 VDC
• Electrical life at full load: 500,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500 VDC
• Dielectric strength: 1,000 Vrms 50 Hz

• Panel thickness: - IZM: 3 mm (.118) max. - IZN: 4 mm (.157) max.
• Total travel: 1.8 mm (.070) +/- 0.3 mm
• Typical operating force: 6 N +/- 2 N
• Low level or mechanical life: 1,000,000 cycles
• Torque: IZN: 1 Nm max. IZM: 0.7 Nm max. applied to nut
• Soldering : 320 °C max. for 3 sec.

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

MATERIALS
• Case: thermoplastic UL94-V0
• Plunger: polyamide
• Bushing/bezel: brass, nickel plated
• Contacts: 4: silver, gold plated 2: silver (screw terminals)
• Multi-wire lead AWG20, section 0.6 mm2
• LED wire: AWG26, section 0.12 mm2
• Lens: polycarbonate
• Terminal seal: epoxy (except screw terminals)

Content missing