KL Series Rocker Switch

Power rocker switch available with 2 or 3 positions, with one locked position. Actuator must be pressed to activate the protected function of the rocker. Two frames protect the unlocking actuator from untimely activation. Patented intuitive ergonomics.

MAIN FEATURES

  • Wide choice of colours
  • Laser etched symbols
  • Illuminated or non-illuminated
  • 20 Amp version
  • Elastomer membrane
  • IP69K panel sealing

 

Description

APEM KL Series Power rocker switch available with 2 or 3 positions, with one locked position. Actuator must be pressed to activate the protected function of the rocker. Two frames protect the unlocking actuator from untimely activation. Patented intuitive ergonomics.

MAIN FEATURES of the KL Series Power Rocker Switch:

  • Wide choice of colours
  • Laser etched symbols
  • Illuminated or non-illuminated
  • 20 Amp version
  • Elastomer membrane
  • IP69K panel sealing

Control Devices is the official APEM distributor for Australia and New Zealand. APEM offers a broad selection of quality products with proven effectiveness in harsh environments. From Push buttons, Rockers, Toggles, LED indicators, Emergency Stops to Joysticks and keypads.

APEM develops and manufactures professional switch products for diversified markets including instrumentation, medical, communications, industrial automation, defence and transport. With a vertically integrated production, and controls all stages of product development and production: from tooling, moulding, screw machining to assembly and final inspection.

APEM’s dedication and experienced teams can respond to the most complex requirements. This technical expertise ensures the continuous growth of our product ranges, allowing strong partnerships with our customers and providing the necessary flexibility to create an infinite number of products.

APEM offers a range of more than 50,000 customisable part numbers: colour, marking, finish, shape and dimensions… unlimited combinations are possible. This variety of components allows them to create the unique combination to match your design. Custom colours, specific materials, special backlighting or varied shapes are available upon request. Particular attention is paid to the cosmetic appearances of our products to best match your requirements, from specific markings to brightness illumination for outdoor applications.

By controlling all phases of manufacturing and quality control, APEM products offer the ability to withstand the adverse elements associated with harsh environments, without affecting their life expectancy.

See all APEM Products

Follow us on Facebook

• Currrent/voltage rating with resistive load :
- Silver plated contacts :
A : 5 A 24 VDC, 100,000 cycles - 10 A 24 VDC, 10,000 cycles (terminals 6.35 x 0.8 only)
S : 20 A 12 VDC, 10,000 cycles
- Gold plated contacts (D) : 20 mA 12 V, 150,000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength : 2,000 Vrms 50 Hz min. between terminals

• Mechanical life : 150,000 cycles min.
• Panel thickness : 0.8 mm to 4.6 mm
• Recommended panel thickness : between 2 mm and 3.5 mm

ENVIRONMENTAL SPECIFICATIONS
• Sealing options :
K : IP68 to front panel components of switch only according to IEC 60529
Z : IP69K panel sealing according to DIN 40050-9
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Operating temperature :-40 °C to +85 °C (-40 °F to +185 °F)

MATERIALS
• Case : PA 6-6
• Actuator and unlocking actuator : ABS or elastomeric membrane
• Bezel : PA 6-6
• Contacts & terminals : brass, solid silver grain, silver plated (A) or brass, solid silver grain, gold plated (D)
• Contact roller : brass, nickel plated

Content missing