• Standard actuation force: 3.5 N typ
• Max. Actuation force: 100 N for 10 sec
• Key travel: 1 mm
• Lifetime: >10,000,000
Multimec 3F
NOTE: This item is not available for distribution in NZ, please contact us for other products that are available.
Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.
Caps that can be mounted on Multimec 3F switches: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1WP, 1X and 1ZC.
The switches has a dimension of 10 x 10 mm and a height of 10.4 mm. The switch has a momentary NO switch function. It has an IP67 sealing.
It can operate 10,000,000 cycles. Designed with surface mount (SMD), Through hole (TH) or through-hole RAS mounting. The switch has the options of illumination.
• Contact resistance: 10 M Ω
• Recommended load:
Silver: 0.5 - 50 mA 24 VDC
Gold: 0.5μ - 50 mA 24 VDC
• Contact bounce: <2 mS - typically 0.5 mS
• Through-hole (TH) or surface mount (SMD) or right angle through-hole
• 50 mA / 24 VDC
• Single pole/momentary
• 10,000,000 operations lifetime
• Temperature range: -40/+160 °C
• IP67 sealing
• Actuation force: 3.5 N
ENVIRONMENTAL SPECIFICATIONS
• Working temperature: -40/+160 °C
• Storage temperature: -40/+160 °C
• Soldering(TH): IEC 68-2-20
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMENTAL ENDURANCE IEC 68-2-3
• Temperature: +40 °C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85 °C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP67
MATERIALS
Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver: Stainless steel (+ 3μAg)
Gold: Stainless steel (+ 1μAu)
• Fixed contacts:
Silver - SnCu + 2μNI + 3μAg
Gold - SnCu + 2μNI + 1μAu
Terminals: SnCu + 2μNI + 3μSn100
Content missing
Manufacturer
