NA3-30 Series Inclinometers

Inclinometers with integrated 0…5 Volt signal conditioner for measurement in the ranges of ±5, ±10, ±30, ±45, ±70 degrees

The capacitive, dielectric liquid based inclinometers NA2-05, NA2-10, NA3-30, NA4-45 and NA4-70 contain new sensor electronics. These are made up of a highly stable, laser-trimmed signal conditioner with electronic compensation for temperature drift, highly stable supply voltage regulation circuitry and low-pass filtering of the measurement signal to eliminate unwanted noise.

The capacitive measurement principle guarantees a very stable, linear relationship between the inclination being measured and the normalised output signal.

The sensor electronics require minimal power and, together with the capacitive primary transformer, are characterised by low errors, high signal-to-noise ratio and high long-term stability.

Contrary to measuring inclinations using accelerometers, this measurement principle enables a linear relationship between the inclination to be measured and the output signal, independent of the constant of gravity at the place of measurement, i.e. Independently of where the measurement is taking place, whether in Europe, Australia, on Mount Everest or the Moon.

  • Small size light weight
  • Linear output response
  • High measurement accuracy
  • Small zero drift
  • Small cross sensitivity
  • High long term stability – virtually infinite lifespan
  • Hysteresis-free output signal
  • Integrated sensor electronics including signal conditioner and low-pass filter
  • No data memory with memory loss
  • Temperature compensated, conditioned 0…5VDC output signal
  • Highly stable internal voltage regulation
  • Optional 5 Volt reference voltage output
  • Unconditioned operating voltage between 9V and 30V
  • Low power consumption
  • Protection against reverse supply voltage polarity
  • EMC certified CE certified
  • No interference by surrounding electromagnetic fields
  • Shockproof, no moving mechanical parts
  • Hermetically sealed
  • Sensor electrically isolated from point of measurement by high quality plastic housing – no ground connection
  • Zero point adjustable through 360° using clamping ring

 

Description

Seika NA3-30 Series Inclinometers with integrated 0…5 Volt signal conditioner for measurement in the ranges of ±5, ±10, ±30, ±45, ±70 degrees

The NA3-30 Series Inclinometers are capacitive, dielectric liquid based inclinometers NA2-05, NA2-10, NA3-30, NA4-45 and NA4-70 contain new sensor electronics. These are made up of a highly stable, laser-trimmed signal conditioner with electronic compensation for temperature drift, highly stable supply voltage regulation circuitry and low-pass filtering of the measurement signal to eliminate unwanted noise.

The capacitive measurement principle guarantees a very stable, linear relationship between the inclination being measured and the normalised output signal.

The sensor electronics require minimal power and, together with the capacitive primary transformer, are characterised by low errors, high signal-to-noise ratio and high long-term stability.

Contrary to measuring inclinations using accelerometers, this measurement principle enables a linear relationship between the inclination to be measured and the output signal, independent of the constant of gravity at the place of measurement, i.e. Independently of where the measurement is taking place, whether in Europe, Australia, on Mount Everest or the Moon.

  • Small size light weight
  • Linear output response
  • High measurement accuracy
  • Small zero drift
  • Small cross sensitivity
  • High long term stability – virtually infinite lifespan
  • Hysteresis-free output signal
  • Integrated sensor electronics including signal conditioner and low-pass filter
  • No data memory with memory loss
  • Temperature compensated, conditioned 0…5VDC output signal
  • Highly stable internal voltage regulation
  • Optional 5 Volt reference voltage output
  • Unconditioned operating voltage between 9V and 30V
  • Low power consumption
  • Protection against reverse supply voltage polarity
  • EMC certified CE certified
  • No interference by surrounding electromagnetic fields
  • Shockproof, no moving mechanical parts
  • Hermetically sealed
  • Sensor electrically isolated from point of measurement by high quality plastic housing – no ground connection
  • Zero point adjustable through 360° using clamping ring

See all Seika products here

Follow us for updates via Facebook

Content missing