► Measurement and recording of 54 power network parameters in 1-phase 2-wire or 3-phase 3 or 4-wire balanced and unbalanced systems.
► Harmonics up to 51st for current and voltage

► Backlit LCD screen, fully configurable by a user
● 22 pages, 3 parameters in each
● 1 page with harmonics presentation

► Indications include the values of programmed ratios
► Memory of minimum and maximum values

► 2 configurable alarm outputs
● Mode of supervisory relay for alarm outputs - additional function. To make function active, please order appropriate license key - details in ordering code. Function can be also activated on the devices which have been already installed on the facility after software upgrade.
● Supervisory relay mode enables detection of following events:
- voltage drop or growth
- current drop or growth
- current or voltage unbalance
- phase sequence
● User can specify:
- the thresholds of monitored events
- monitoring of phase relay
- memory of relay state
- delay of switch on/off relay
- relay state after the event has occurred

► Optional: with additional module of analogue outputs - S4AO type (4 current or voltage outputs)
► RS485 digital output - MODBUS protocol
► Logging of up to 32 measured parameters in the internal memory 8GB

► Modern and user-friendly Ethernet interface 10/100 BASE-T:
● Protocol: MODBUS TCP/IP, HTTP, FTP
● Services: www server, ftp server, DHCP client
● Protocol: MQTT additional function. To make protocol active, please order appropriate license key - details in ordering code. Protocol can be also activated on the devices which have been already installed on the facility after software upgrade.

► Wide range of voltage supply:
● 85 ... 253 Vac or 90 ... 300 Vdc
● 20 ... 40 Vac or 20 ... 60 Vdc

► Programming of parameters using free eCon software
► Battery backup RTC
► Modern design allows for installation of the meter in modular switchgear in accordance with EN 62208 (meter has a width of 6 modules) on 35mm rail.
► External dimensions: 105 x 110 x 60 mm