RS2 Series Output Option RS232C
The RS2 output option allows the communication between a KOSMOS instrument and a master device via RS232C interface.
The option is supplied with the following accessories:
- RS2 card.
- A 2m cable RJ11 with telephone plug.
Software configuration permits selection of the instrument address, transmission rate (1200 to 19200 baud), communications protocol (standard, ISO 1745 or MODBUS RTU).
Content missing
Related Products
-
An option of 2 or 4 setpoints, programmable within the full display range, can be incorporated to the unit thus providing alarm and control capabilities by means of individual...
Control Output Option 4 Relays – 4RE Series
An option of 2 or 4 setpoints, programmable within the full display range, can be incorporated to the unit thus…
-
DITEL Pica 40-ADC Series Digital Panel Meter is an indicator for DC measurements using an external shunt. Measuring 48 x 24mm front panel and a length of 40mm. Designed for a ...
Pica 40-ADC Digital Panel Meter
DITEL Pica 40-ADC Series Digital Panel Meter is an indicator for DC measurements using an external shunt. Measuring 48 x…
-
The MICRA-M is a TRICOLOUR multi-function programmable instrument for: Process - mA, V, Temperature - Pt100, Thermocouples J, K, T), Load Cells - mV/V, mV and Repeaters - RS48...
Micra-M Digital Panel Meter
The MICRA-M is a TRICOLOUR multi-function programmable instrument for: Process - mA, V, Temperature - Pt100, Thermocouples J, K, T),…
-
Two ranges of analog output (0-10V and 4-20mA) can be incorporated to the KOSMOS instrument by means of an additional card (ANA option) which is installed on...
Analogue Output Option – ANA Series
Two ranges of analog output (0-10V and 4-20mA) can be incorporated to the KOSMOS instrument by means of an additional…








