SRH220DR Rotary Position Sensor Dual-redundant

A dual-redundant output, contactless, rotary position sensor with integrated 6-way connectors, using a factory programmable Hall-effect sensor system.

  • Contactless – Hall-effect technology
  • Dual-redundant output
  • 5Vdc or 9-30Vdc supply (13.5-30Vdc only for 0-10Vdc output version)
  • Analogue (0.1 – 4.9, 0.5 – 4.5 or 0-10Vdc) or Digital (PWM) outputs
  • Measurement range from 0-20° to 0-360° in 1° increments
  • 12-bit resolution (0.025%) over the angular range
  • Extremely low signal noise level – less than 1mVrms
  • Electrically interchangeable with potentiometers
  • Operating temperature -40° to +140°C
  • Environmental protection to IP68
  • Crush-proof mounting flange with steel inserts
  • Choice of Deutsch or AMP connector
  • Optional lever drive arm is available.
  • Rapid availability

SRH220DR provides reliable and accurate rotary position measurement in extreme industrial environments, such as specialist off-highway construction and agricultural vehicles, where shock, vibration and extreme temperatures can occur.

This new sensor design is housed in an all-new molded housing that has a choice of fully-integrated 6-way Deutsch DT06 or AMP 1.5 Superseal connectors, allowing separate supply voltage and output signals on two channels. Environmental protection to IP67/IP68 is dependent on the connector style selected.

SRH220DR operates from either 5Vdc regulated or 9-30Vdc unregulated power supply and is available with analogue (0.1-4.9, 0.5-4.5 or 0-10Vdc) or digital (PWM) output signals. The sensor is factory programmable, allowing you to specify the output signal type, the measurement range (0-20° to 0-360° in 1° increments) and the output direction (clockwise or anticlockwise).

The sensor has a 12-bit resolution (0.025%) over the selected measuring range, and operates from -40 to +140°C when powered at 5Vdc.

 

Description

Penny & Giles SRH220DR contactless, rotary position sensor with dual-redundant output and with integrated 6-way connectors, using a factory programmable Hall-effect sensor system.

Features of the SRH220DR Contactless Rotary Position Sensor with Dual-redundant outputs:

  • Contactless – Hall-effect technology
  • Dual-redundant output
  • 5Vdc or 9-30Vdc supply (13.5-30Vdc only for 0-10Vdc output version)
  • Analogue (0.1 – 4.9, 0.5 – 4.5 or 0-10Vdc) or Digital (PWM) outputs
  • Measurement range from 0-20° to 0-360° in 1° increments
  • 12-bit resolution (0.025%) over the angular range
  • Extremely low signal noise level – less than 1mVrms
  • Electrically interchangeable with potentiometers
  • Operating temperature -40° to +140°C
  • Environmental protection to IP68
  • Crush-proof mounting flange with steel inserts
  • Choice of Deutsch or AMP connector
  • Optional lever drive arm is available.
  • Rapid availability

SRH220DR provides reliable and accurate rotary position measurement in extreme industrial environments, such as specialist off-highway construction and agricultural vehicles, where shock, vibration and extreme temperatures can occur.

This new sensor design is housed in an all-new moulded housing that has a choice of fully-integrated 6-way Deutsch DT06 or AMP 1.5 Superseal connectors, allowing separate supply voltage and output signals on two channels. Environmental protection to IP67/IP68 is dependent on the connector style selected.

SRH220DR operates from either 5Vdc regulated or 9-30Vdc unregulated power supply and is available with analogue (0.1-4.9, 0.5-4.5 or 0-10Vdc) or digital (PWM) output signals. The sensor is factory programmable, allowing you to specify the output signal type, the measurement range (0-20° to 0-360° in 1° increments) and the output direction (clockwise or anticlockwise).

The sensor has a 12-bit resolution (0.025%) over the selected measuring range, and operates from -40 to +140°C when powered at 5Vdc.

The Penny & Giles product range comprises a broad selection of joysticks, sensors and solenoids for use on commercial vehicles and industrial equipment.

The products are the legacy of the Penny & Giles company founded in 1956 and acquired by Curtiss Wright in 2002.

The present-day product range includes: linear and rotary position sensors; LVDT and RVDT transducers; joysticks; studio faders; digital panel meters; and solenoid actuators for a wide range of industrial motion control applications.

Their joystick controls are suitable for commercial vehicle applications for both on- and off-highway use. These include construction and agricultural vehicles, material handling and other specialty vehicles. They are also suitable for use with industrial equipment such as robotics. Their finger-operated joystick controllers are designed for the smooth, precise control of critical functions in a variety of industrial applications where a Human-Machine Interface (HMI) is required. They also have rugged joystick controllers are designed for the more demanding installations found within operator cabs for off-highway vehicles. A wide range of linear position sensors, tilt sensors, rotary sensors, linear displacement transducers and linear potentiometers that offer distinct advantages in reliability, stability and compactness.

For the full range of Penny & Giles products

Follow us on Facebook

Content missing