P111 Linear Position Sensor

The P111 is a rugged, heavy duty version of the P101 stand alone linear sensor with a significantly stonger 1/2″ pushrod. The P111 is particularly well suited to applications where vibration is an issue or where the requirement is for a long travel sensor, horizontally mounted and supported by rod eyes.
It remains an affordable, durable, high accuracy linear sensor designed for industrial and scientific feedback applications. The highly compact and space efficient unit is responsive along almost all of its length.

Like all Positek® sensors, the P111 provides a linear output that is proportional to the displacement. Each unit is supplied calibrated to the exact travel required by the customer, the P111 is available with any travel from 0-5mm to 0-800mm, for example, if your application requires 10″ (254 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 254 mm.

The sensor is very robust, the body and push rod are made from stainless steel for good environmental resistance and service life. This product is well suited to OEM customers looking for good sensor performance in arduous applications such as industrial machinery where cost is important. Overall performance, repeatability and stability are outstanding over a wide temperature range.

The sensor is easy to install with mounting options that include M8 rod eye bearings and body clamps. The push rod is normally supplied captive but can be supplied free if required. The push rod is supplied with either; M8 rod end, M8 female thread or with a dome end.

The P111 is sealed to either IP65/IP67 depending on which connector/cable option. The sensor has fully integrated EMC protection.

View all Linear Sensors

 

Description

The Positek P111 linear position sensor is a rugged, heavy duty version of the P101 linear sensor with a significantly stonger 1/2″ pushrod. The P111 is particularly well suited to applications where vibration is an issue or where the requirement is for a long travel sensor, horizontally mounted and supported by rod eyes.
It remains an affordable, durable, high accuracy linear sensor designed for industrial and scientific feedback applications. The highly compact and space efficient unit is responsive along almost all of its length.

Like all Positek® sensors, the P111 linear position sensor provides a linear output that is proportional to the position displacement. Each unit is supplied calibrated to the exact travel required by the customer, the P111 is available with any travel from 0-5mm to 0-800mm, for example, if your application requires 10″ (254 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 254 mm.

The sensor is very robust, the body and push rod are made from stainless steel for good environmental resistance and service life. This product is well suited to OEM customers looking for good sensor performance in arduous applications such as industrial machinery where cost is important. Overall performance, repeatability and stability are outstanding over a wide temperature range.

The sensor is easy to install with mounting options that include M8 rod eye bearings and body clamps. The push rod is normally supplied captive but can be supplied free if required. The push rod is supplied with either; M8 rod end, M8 female thread or with a dome end.

The P111 is sealed to either IP65/IP67 depending on which connector/cable option. The sensor has fully integrated EMC protection.

Follow us on Facebook

Positek offers a range of options for its standard sensors. Each sensor is manufactured to suit each customer's preferences. If your requirement is outside the options given below, Positek can modify/ redesign a sensor to suit your specific requirement. Standard options are available as below:

 

Measurement Range

Factory set to any length from 0-5mm to 0-800mm in increments of 1mm. For example, if your application requires 10" (254 mm) measurement, then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 254 mm.

 

Electronic Options

Output Signal Supply Input Option Code
Standard    
0.5V to 4.5V DC ratiometric +5V DC nom. ±0.5V A
Buffered    
0.5V-4.5V DC +24V DC nom. +9-28V G
±0.5V DC ±15V DC nom. ±9-28V B
0.5-9.5V DC +24V DC nom. +13-28V C
±10V DC ±15V DC nom. ±13.5-28V D
4-20mA (2 wire) +24V DC nom. +18-28V E
4-20mA (3 wire sink) +24V DC nom. +13-28V F
4-20mA (3 wire source) +24V DC nom. +13-28V H

 

Connector/Cable Options

Option Option Code
Connector- Hirschmann GD series Axial, IP65 J
Connector - Axial IP67, M12 - 4 pin. Without trim adjustment J + Z600
Connector - Axial IP67, M12 - 4 pin. With trim adjustment J + Z601
Connector - Radial IP67, M12 - 4 pin K
Cable with PG9 gland Radial, Gland IP67 I
Cable with short gland Axial, Gland, IP67 M
Cable with M12 gland Axial, Gland, IP67 L
Cable length - The standard length of cable supplied with a Positek position sensor is 50cm although you can specify any length you require. Specified in cm after the L, M or I e.g. L200 for 200cm cable from axial cable gland

 

Mounting Options

Option Option Code
M8 Rod eye on body (only with Option "I" or "K") N
Body clamps, 1 Pair (see drawing) P
Body clamps, 2 Pairs (see drawing) P2
M8 Rod eye on push rod U

 

Push Rod Options

Option Option Code
Spring loaded (extended) (up to 300mm stroke - for longer strokes please contact Positek) R
Spring loaded (retracted) (up to 300mm stroke - for longer strokes please contact Positek) S
Dome end on push rod (only with option "R") T
Non-captive push rod V

 

<+/-0.1% FSO Linearity error (≥10mm and ≤400mm stroke length) Option Code
Z650

Dimensions

Body Diameter 35mm
Body Length (Axial version) Measurement length + 163mm
Probe Length (Radial version) Measurement length + 186mm
Push Pod Extension Measurement length + 7mm
Push Rod Outside Diameter 12.6mm
Travel Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
Independent Linearity

<±0.25% up to 450mm <±0.50% over 450mm at 20°C
<±0.1% available on request

Temperature Coefficient <±0.1%/°C Gain & <±0.01%FS/°C Offset
Resolution Infinite
Noise

<0.02% FSO

Frequency Response

>10KHz (-3dB);
>300Hz (-3dB); 2 wire 4-20mA

 

Output Signal and Output Load

Output Signal Output Load
0.5 to 4.5 V DC ratiometric 5k Ohms min
0.5 to 4.5 V DC 5k Ohms min
± 5V DC 5k Ohms min
± 10V DC  5k Ohms min
0.5 to 9.5 V DC 5k Ohms min
4 to 20mA (2 wire) 300 Ohms max at 24V
4 to 20mA (3 wire sink) 950 Ohms max at 24V
4 to 20mA (3 wire source) 300 Ohms max at 24V
Supply Current 12 mA Typical 20 mA max (voltage versions)

 

Temperature Limits

Operating -40 to +125°C (5V input only)
-20 to +85°C
Storage -40 to +125°C

 

Other

EMC Susceptibility EN 61000-6-2
EMC Radiated EN 61000-6-3
Vibration IEC 68-2-6: 10g
Shock IEC 68-2-29: 40g
MTBF 350,000 hrs 40°C Gf
Sealing IP65 (connector) / IP67 (cable)
Electrical Connections Screened cable or integral connector

DATA SHEET

BODY CLAMPS

Content missing