P112 Linear Position Sensor

The P112 is a very compact, durable, affordable, high accuracy linear inductive position sensor with a good stroke to overall length ratio; designed for gauge head positioning in scientific and industrial applications.

Like all Positek® sensors, the P112 provides a linear output that is proportional to the displacement. Each unit is supplied calibrated to the exact travel required by the customer, the P112 is available with any travel from 0-5mm to 0-50mm. For example, if your application requires 3/4″ (19 mm) measurement then Positek will manufacture the sensor specifically for this length. The calibration will be set up for 19 mm. The overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is very robust, manufactured from stainless steel the P112 has a long service life and strong environmental resistance and is particularly suitable for applications that require good sensor performance in harsh environments such as industrial machinery where cost is important.

The P112 has a spring loaded plunger with a dome end and the body has a long 1/2″ UNF mounting thread and is supplied with two lock nuts for positioning. Sealing is IP67 and the P112 has fully integrated EMC protection.

View all Linear Sensors

 

Description

The Positek P112 linear position sensor is a very compact, durable, affordable, high accuracy linear inductive position sensor with a good stroke to overall length ratio; designed for gauge head positioning in scientific and industrial applications.

Like all Positek® sensors, the P112 linear position sensor provides a linear output that is proportional to the displacement. Each unit is supplied calibrated to the exact travel required by the customer, the P112 is available with any travel from 0-5mm to 0-50mm. For example, if your application requires 3/4″ (19 mm) measurement then Positek will manufacture the sensor specifically for this length. The calibration will be set up for 19 mm. The overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is very robust, manufactured from stainless steel the P112 has a long service life and strong environmental resistance and is particularly suitable for applications that require good sensor performance in harsh environments such as industrial machinery where cost is important.

The P112 has a spring loaded plunger with a dome end and the body has a long 1/2″ UNF mounting thread and is supplied with two lock nuts for positioning. Sealing is IP67 and the P112 has fully integrated EMC protection.

As a leading designer and manufacturer or linear, rotary, tilt and intrinsically safe position sensors, Positek® has the expertise to supply a sensor to suit a wide variety of applications.

Follow us on Facebook

Positek offers a range of options for its standard sensors. Each sensor is manufactured to suit each customer's preferences. If your requirement is outside the options given below, Positek can modify/ redesign a sensor to suit your specific requirement. Standard options are available as below:

 

Measurement Range

Factory set to any length from 0-5mm to 0-50mm in increments of 1mm. For example, if your application requires 3/4" (19mm) measurement, then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 19mm.

 

Electronic Options

Output Signal Supply Input Option Code
Standard    
0.5V to 4.5V DC ratiometric +5V DC nom. ±0.5V A
0.5V-4.5V DC +9-28V DC nom. 24V G
0.5-9.5V DC +13-28V DC nom 24V C

 

Connector/Cable Options

Option Option Code
Connector - Axial, IP67, M12 4 pin J
Connector - Radial, IP67, M12 4 pin K
Cable with PG9 gland Axial, Gland IP67 L
Cable with boot, Radial IP67 I
Cable length - The standard length of cable supplied with a Positek position sensor is 50cm although you can specify any length you require. Specified in cm after the L or I e.g. L200 for 200cm cable from axial cable gland

 

<+/-0.1% FSO Linearity error (10mm minimum stroke length) Option Code
Z650

Dimensions

Body Diameter 19mm
Body Length (Excluding thread) Axial version: 160.7mm
Radial version with cable: 166mm
Radial version with Connector: 169.5mm
Mounting Thread Length 59mm
Spring Force 1.5-4.5N (Approximately)
Travel Any stroke from 0-5mm to 0-50mm (e.g. 19mm)
Independent Linearity <±0.25% at 20°C
<±0.1% available on request
Temperature Coefficient <±0.1%/°C Gain & <±0.01%/FS/°C Offset
Resolution Infinite
Noise

<0.02% FSO

Frequency Response

>10KHz (-3dB);
>300Hz (-3dB); 2 wire 4-20mA

 

Output Signal and Output Load

Output Signal Output Load
0.5 to 4.5 V DC ratiometric 5k Ohms min
0.5 to 4.5 V DC 5k Ohms min
0.5 to 9.5 V DC ratiometric 5k Ohms min
Supply Current 10 mA Typical 20 mA max

 

Other

EMC Susceptibility EN 61000-6-2
EMC Radiated EN 61000-6-3
Vibration IEC 68-2-6: 10g
Shock IEC 68-2-29: 40g
MTBF 350,000 hrs 40°C Gf
Sealing IP65 (connector) / IP67 (cable)
Electrical Connections Screened cable or integral connector

Content missing