P117 Linear Position Sensor

The P117 is is very space efficient and compact with its 19mm body diameter. Affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The repeatability, overall performance and stability are excellent over a large temperature range. The P117 is housed within a stainless steel body tube and has a 3/8″ stainless steel push rod.

Various mounting options are available including M5 male stud and M5 rod eye bearing. The push rod can be supplied free or captive with M5 male thread or M5 rod eye. Like all Positek® products, the P117 provides a linear output proportional to the displacement. Each unit is supplied calibrated to the customers exact requirement, from 0-5mm to 0-350mm and with full EMC protection built in. For example, if your application requires 3/4″ (19 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 19 mm.
The P117 is sealed to IP67. The sensor has fully integrated EMC protection.

View all Linear Sensors

 

Description

The Positek P117 Slim-Line Linear Position Sensor is very space efficient and compact with its 19mm body diameter. Affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The repeatability, overall performance and stability are excellent over a large temperature range. The P117 Slim-line Linear Position Sensor is housed within a stainless steel body tube and has a 3/8″ stainless steel push rod.

Various mounting options are available including M5 male stud and M5 rod eye bearing. The push rod can be supplied free or captive with M5 male thread or M5 rod eye. Like all Positek® sensors, the P117 slim-line sens0r provides a linear output proportional to the displacement. Each unit is supplied calibrated to the customers exact requirement, from 0-5mm to 0-350mm and with full EMC protection built in. For example, if your application requires 3/4″ (19 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 19 mm.
The P117 is sealed to IP67. The sensor has fully integrated EMC protection.

As a leading designer and manufacturer of linear, rotary, tilt and intrinsically safe position sensors, Positek has the expertise to supply a sensor to suit a wide variety of applications.

Follow us on Facebook

Positek offers a range of options for its standard sensors. Each sensor is manufactured to suit each customer's preferences. If your requirement is outside the options given below, Positek can modify/ redesign a sensor to suit your specific requirement. Standard options are available as below:

 

Measurement Range

Factory set to any length from 0-5mm to 0-350mm in increments of 1mm. For example, if your application requires 10" (254 mm) measurement, then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 254 mm.

 

Electronic Options

Output Signal Supply Input Option Code
Standard    
0.5V to 4.5V DC ratiometric +5V DC nom. ±0.5V A
0.5V-4.5V DC +9-28V DC nom. 24V G
0.5-9.5V DC +13-28V DC nom 24V C

 

Connector/Cable Options

Option Option Code
Connector - Axial, IP67, M12 4 pin J
Connector - Radial, IP67, M12 4 pin K
Cable with PG9 gland Axial, Gland IP67 L
Cable with boot, Radial IP67 I
Cable length - The standard length of cable supplied with a Positek position sensor is 50cm although you can specify any length you require. Specified in cm after the L or I e.g. L200 for 200cm cable from axial cable gland

 

Mounting Options

Option Option Code
M5 Rod eye on body (only with Option "I" or "K") N
M5 male thread (body) Blank
Body Clamps
See Drawing
P
M5 Rod eye on push rod U
M5x0.8 male thread (push rod) Blank

 

Push Rod Options

Option Option Code
Non-captive push rod V

 

<+/-0.1% FSO Linearity error (10mm minimum stroke length) Option Code
Z650

Dimensions

Body Diameter 19mm
Body Length (Axial cable version) Measurement length + 109.7mm
Body Length (Axial connector version) Measurement length + 109.7mm
Body Length (Radial cable version) Measurement length + 115mm
Body Length (Radial connector version) Measurement length + 118.5mm
Travel Any stroke from 0-5mm to 0-350mm (e.g. 205mm)
Independent Linearity <±0.25% at 20°C
<±0.1% available on request
Temperature Coefficient <±0.1%/°C Gain & <±0.01%/FS/°C Offset
Resolution Infinite
Noise

<0.02% FSO

Frequency Response

>10KHz (-3dB)

 

Output Signal and Output Load

Output Signal Output Load
0.5 to 4.5 V DC ratiometric 5k Ohms min
0.5 to 4.5 V DC 5k Ohms min
0.5 to 9.5 V DC ratiometric 5k Ohms min
Supply Current 10 mA Typical 20 mA max

 

Temperature Limits

Operating -40 to +125°C (5V input only)
-20 to +85°C
Storage -40 to +125°C

 

Other

EMC Susceptibility EN 61000-6-2
EMC Radiated/td>

EN 61000-6-3
Vibration IEC 68-2-6: 10g
Shock IEC 68-2-29: 40g
MTBF 350,000 hrs 40°C Gf
Sealing IP67
Electrical Connections Screened cable or integral connector

DATA SHEET

BODY CLAMPS

Content missing