PNA160 Miniature Pressure Sensor

The EFE PNA160 Miniature Pressure Sensor for Nuclear Environment has been designed to operate in applications involving high gamma radiations.

 

Description

The EFE PNA160 Miniature Pressure Sensor for Nuclear Environment has been designed to operate in applications involving high gamma radiations.
The PNA160 Miniature Pressure Sensor has been designed to operate in applications involving high gamma radiations. Manufactured with the ruggedised and EFE propriety sensing technology, it has been tested with gamma doses above 1000kGy. Its Wheatstone bridge which is puttered on a metal diaphragm delivers an unamplified output which can be conditioned by standard amplifiers. We can set up PNA161 with out AMP320, a signal conditioning device, totally analogue and without any software or firmware, to deliver a 0-10V or 4-20mA output. We can also supply the adapted cable assembly qualified for nuclear environments. Being all stainless steel, PNA161 is compatible with most of the fluids. IT’s small package and low mass make it very adapted to application where space is a priority and generate less waste to be processed. Its manufacturing process, including traceable controls and special burn-in, gives the best assurance of high performance and stability.

EFE pressure sensor have been developing and manufacturing a complete range of pressure sensors since 1973. They have designed their proprietary advanced sensing technologies and created a unique range of high performance and miniature pressure transducers.

With over 35 years of experience, EFE have developed a unique range of miniature and sub-miniature pressure transducers. This complete range includes:
– Low pressure (from 100 mbar), high pressure (up to 3000 bar) and negative/positive pressure ranges (from –1 bar).
– Unamplified sensors,
– Transducers with analogue or digital built-in electronics
– Standard or high accuracy with digitally corrected transducers offering ultimate total error band including all errors in the compensated temperature range (0.1% fs).
– Large temperature capability: from –60°C to 260°C for unamplified sensors and –55°C to +175°C for amplified transducers.
– High dynamic capability with semi-flush diaphragms
– High performance built-in electronics adapted to on-board applications (8-16V or 8-30V power supply), high bandwidth capability (up to 5 or 10 kHz), low noise, low consumption (<10 mA) and related protection.
– All stainless steel, titanium or inconel construction allowing compatibility with corrosive media
– Robust construction proven in the harshest environments

Applications where space is limited and weight critical : gear box & engine development, satellite, missile, aerospace, motorsport.

View more EFE Pressure Sensors

Follow us on Facebook

Model Power Supply Output Signal Consumption
PNA161 10 Vdc Stabilised and regulated mV/V <10mA
Power Supply 10Vdc Stabilised and regulated
Offset ±3% FS
Sensitivity 2 to 5mV/V
Pressure ranges (FS) 3bar; -1/+4bar; 5bar;10bar; 20bar; 40bar; 100bar; 250bar; -14.5/+40PSI; 50 PSI; -14.5/+60PSI; 70PSI; 150PSI; 300 PSI; 500 PSI; 1500PSI; 300PSI
Type Gage and Absolute
Type
(For ranges > 40bar)
Sealed gage
Mechanical connection 3/8-24 UNF-3A male
M10x1-4h male
1/4" VCR male
Electrical connection Hermetic MIL-C-26482 - 6 pin receptacle
Compensated Temperature range 0 to +60°C
Combined thermal zero & sensitivity shifts ±0.02% FS/°C
Size Miniature
Diameter 16.6mm
Material(s) of wetted parts Stainless steel 15-5PH
Stainless steel 17-4PH
Stainless steel 316L
Signal Bandwidth DC to 1000Hz @ -3dB
Non Linearity and Hysteresis combined ±0.25% FS typical (±0.35% FS max)

Content missing