SA59660 Flange mounting kit

Flange mounting kit for Penny & Giles SLS320 Linear Displacement Sensors. Two flanges in this kit of 4 holes 5.2 diameter equi-spaced on 52.4 PCD.

Mounting recommendation for all units between 1150 to 1600 mm stroke length, Penny & Giles recommends the use of body clamp or flange mounting kits to support the sensor when horizontally mounted. Alternatively, use the protective sleeve kit with the self aligning bearing mountings to provide increased rigidity.

View all Sensor Accessories

 

Description

The Penny & Giles SA59660 flange mounting kit for Penny & Giles SLS320 Linear Displacement Sensors. Two flanges in this kit of 4 holes 5.2 diameter equi-spaces on 52.4 PCD.

Mounting recommendation for all units between 1150 to 1600 mm stroke length, Penny & Giles recommends the use of body clamp or flange mounting kits to support the sensor when horizontally mounted. Alternatively use the protective sleeve kit with the self aligning bearing mountings to provide increased rigidity.

The SLS320 sensor is used for heavy duty cycle dynamic applications. A number of specialist applications have demanded an enhanced operating life beyond that capable from the standard SLS320 sealed linear sensor. To meet this requirement, we have a special version of this product, which provides optimum lubrication for the track and sliding mechanism for increased operating life. Typically the sensors are mounted parallel using the SA59660 flange mounting kit to actuators fitted to the hydraulic motion bases. Which these bases operate leisure ride cabins at amusement parks around the world. Typically the motion bases run a three minute cycle time for up to 12 hours per day. This sensor is ideally suited to similar applications subject to heavy duty dynamic movements.

A wide choice of mounting options are available and include self-aligning bearings, body clamp kits and flange mounting kits.

View all Linear Sensors

Follow us on Facebook

Content missing